Wheelgirl

More New Velocity Deep V Rim Patterns at Interbike

I know that we will all look back on this time and wonder why we felt the need to decorate our fixie rims with insanely busy colors and patterns. But for now, I like that there are some choices. Personally, there are only a few patterns that appeal to me. But at least I have a choice between silver and black. Here are 4 videos showing off the new line up of Deep V patterns from Velocity. They've proven to be an uber strong rim that can take the abuse of fixed gear urban riding and commuting as well as the stresses and strains of creative fixietrixs. Through it all, Deep V rims stay in one piece and keep quietly doing their job. Check out all of the patterns. Here is a link to the Velocity video I posted last week, too.

Chris King at Interbike Outdoor Demo New Products

I called Chris King Components yesterday to order some hubs for a wheel build. They had a booth at the outdoor demo. I didn't attend the outdoor demo, but here are the new products this year from my favorite headset maker and one of my favorite hub makers. Oh, and they've added a new color to their product offerings, brown. Think coffee with not much half and half in it.

Chris King has come out with new Shimano-style outboard bottom bracket cups in anodized colors with King bearings inside. These will be available in a couple of days. And they have a grease injection port, so you can keep them running smoothly.

If you ride a mountain bike, Chris King has a new 135mm x 12mm through axle and a 135mm x 10mm through axle for you. They've also come out with new bike jerseys and new technical fabric t-shirts.

In the headset area, they are going to a new style of logo branding on the actual component. The style, they call sotto voce is Italian for "under voice" or "soft voice". (You see this marking a ton in classical music when the composer wants you to play more softly or decrescendo.) The Chris King logo is rendered tone on tone color wise. So you can't see a high contract logo. Instead you really see the color of the headset.

My suggestion: I would really like some Chris King skewers. They are a small company making excellent products. But I am building up a set of Classic Road hubs for customer Simon's Independent Fabrication Crown Jewel SE, and I would like to be able to finish off the wheel set with Chris King road skewers, not skewers from an unrelated manufacturer. If you like this idea Chris King skewers, send a respectful email to Chris King. And if you write an email, and they do end up making skewers, stay true to your word, and support the design and manufacturing efforts of this small and excellent bike component company by buying the skewers.

Photos lifted from the Chris King site: New bottom brackets in anodized colors and new sotto voce tone-on-tone logo style on the headset.

Lynskey Performance at Interbike Curvy Single-Speed Mountain Bike

The Lynskey Peformance booth is always a welcomed sight to my eyes in the crowd of 1100 vendor booths at Interbike. David Lynskey is someone who in the Bay Area we call a "maker". Has never ever has tried to sell me anything. He likes, and most probably needs, to make things. His eyes light up when I ask him about projects he is working on that require new applications and fabrication processes for titanium. David Lynskey and his family founded and sold Litespeed almost ten years ago. Lynskey Performance is the custom titanium bike frame company that they launched at Interbike a couple of years ago. The frames are titanium, so they never rust, never fatigue, and are lifetime guaranteed.

Lynskey is applying modern designs to their bike frames, tubing technologies, and titanium material technologies. But, for me, they also give off that familiar old school, stable, manufacturing vibe of guys and gals who for decades have been successful in a specific manufacturing industry. 

Here is one of the curvy single-speed mountain bikes Lynskey Performance brought to the show. (Michael you asked about this bike after you saw it on the Lynskey site. So, this video is for you. I took about four videos of new offerings at the Lynskey booth.)

Lynskey Performance High-Polish Titanium Helix Road Frame

I visited the Lynskey booth the first day of the show, and I took some photos of this Helix road frame. But I couldn't really see how the tubes were twisted in the photos. So, I went back with the video camera. First, I am a sucker for old school chromed road frames. I know that chrome is heavy. I know that the chroming process makes metal brittle. Whatever. I love the simplicity and elegance.

The first time I saw this high-polish finish in the Lynskey booth at last year's show, I couldn't figure out why they had brought a chromed frame to the show. Silly me. It is a high-polish technique for titanium that takes 3 days and results in a mirror finish. Add that finish to the Helix tube set, and you have a frame that people from all over the world stopped by the booth to pet. This Helix road frame has more fingerprints than an FBI database.

Phil Wood Has New Carbonite Bearings at Interbike Video 2 of 2

Here is video 2 of 2 showing the new Phil Wood Carbonite bearings in action. Thanks nice guy who held the hub while I filmed it spinning. These bearings are high-quality steel, but the microscopic pits in the steel are filled with a secret ingredient. What do you think the secret ingredient might be my gearhead readers?

Phil Wood Has New Carbonite Bearings at Interbike Video 1 of 2

Phil Wood has new Carbonite bearings in the bearing cartridges, and they spin like nobody's business. I saw a external bb spin like crazy. And then, I took a track hub, held the ends of the axle, dragged the edges of the flanges on the display table about 8 inches (the way you used to rev a Matchbox car when you were little), and that hub didn't stop spinning for 10-t0-15 seconds with no extra help from me.

The steel ball bearings in the cartridges in Phil Wood's hubs and bottom brackets are high quality, as we all know. But Phil has filled the microscopic pits in the steel bearings with a "secret ingredient".  Watch the video 1 from Interbike in Vegas 2008.

Dia Compe at Interbike 1

Here is 1 of 2 vids from the Dia Compe booth. I took about a zillion vids and photos of bike components. But my Vimeo account only has room for a tiny-sized video currently. So, all of it will be posted over the weeks, and maybe even months. There are 1100 bike, component, and accessory vendors here under 1 roof. I could be happily typing for a really long time. So, keep reading. And check back for the new videos from the show.

1 of 2 Dia Compe Videos at Interbike from Wheelgirl on Vimeo.

New Miche Advanced Primato Track Group Sets in Colors

Yesterday, while I was visiting the Euro Asia Import booth for an hour chatting with kind Steve and Anthony about all of their great new frame offerings, Steve informed me that the new Miche Advanced Primato track groups in blue and red anodized colors had just shown up at the booth a few hours ago. The Advanced Primato cranks take a chain ring with a 144 BCD (bolt circle diameter). Remember: The regular Miche Primato track cranks take a ring with a 135 BCD.

For the money, the Miche track group sets are really a good value. The components look good and work well together, in my opinion, when they are spec'd as a group set on a fixed gear bike. The logo and drilled seat post looks a tiny bit distracting when Miche parts are randomly attached here and there on track bikes in fits and starts. The color of the anodizing is really deep and appealing. For those with discerning eyes for color, the components in both the blue and red group sets sound deeper and darker to your eyes and less pop music teen beat.

Photos taken by Wheelgirl at Interbike in Vegas 2008

Matt Makes the Winning Bike Cap for the Vegas Interbike Show

I have been stopped maybe fifty times today by kind people at Interbike who wish to find out where I got my most cool and well-designed Interbike Vegas hat. The answer is that I got it from a man named Matt, who runs the LVFixed.com online forum (Las Vegas Fixed Gear). Matt, who enjoys graphic design worked some magic on a photo of a real Vegas sign. He works a day job for American Apparel and decided for fun to have Pace print up a limited edition of 100 show bike caps.

Usually, I am given some sort of show item printed with an image of a martini glass, a pair of dice, and a few girls pole dancing to commemorate the bike show. Thanks, Matt for your great bike cap.

Here is Matt modeling the cap he designed. I asked him to send his email to me. So, if you write to this site, I will forward any bike cap inquiries to him (when I get his email.) This is the only info I have about Matt currently.

Photos by Wheelgirl at Interbike in Vegas 2008

Shimano Di2 Dura Ace Electric Battery Info. at Interbike 2008

I talked with Ben at the Shimano booth. Yes, I had many questions about the batteries for the new Dura Ace electronic shifting offering. Ben was extremely gracious and put up with me constantly interrupting him and asking yet another question. First, the retail cost of the system is set at about $4000.00. He asked what I thought of it. And I am not really sure. I like that I can fix my bike without electricity in the middle of no where. And I don't like to charge or carry batteries or battery chargers. However, I do think electronic shifting might be the future. For those those making a living on a bike, and racer feedback is what drives the performance aspects of the bike industry, electronic shifting might be a dream. I tried it on the demo bike. You exert really light finger pressure on the textured or the smooth part of the lever paddle to up and down shifts. You don't push the levers at all. Not even as much pressure as pressing an elevator button.

Here is the battery skinny: They are lithium ion batteries take 1.5 hours to charge from 0 percent to 100 percent. They weigh 68 grams and give you about 2000 km of electronic shifting, about as much mileage as a riding a Tour de France on one charge. This means you can buy two batteries, and put one in your saddle bag. They weigh about as much as an energy bar. The hotter and flatter riding conditions make them last longer than hilly and cold riding conditions.

You can check the battery charge at any point in time with a light unit that sits on the cable under the handle bar. Green light steady is 100 percent. Flashing green light means 75 percent charged. Red light is 50 percent charge. Flashing red light is 25 percent charged, and it will flash by itself. If you choose to ignore the red flashing, you will run the battery down. The almost last 10 percent of the 20 percent energy left state goes to the front derailleur, and then that will stay in whatever ring you choose. The very last 10 percent goes to the rear derailleur. When the battery dies you are riding that single speed you always wanted to build. So, you thrill seekers in the Alps who are bad at details and frequently forget to charge your cell phones, Blackberries, and cameras, choose your last shifts wisely.

The battery compartment has O ring seals, and Shimano has been testing the set up with professional Tour de France peleton riders as well as pro cyclocross riders. No moisture or mud short circuit worries.  You get 500-600 charges to 1 battery pack. The Dura Ace 7900 group set components can all be use for the Di2 Dura Ace electronic shifting, with the exception of the derailleurs front and rear, shifters, and battery.

Photos by Wheelgirl at Interbike 2008 in Vegas

Velocity Has Tons of New Deep V Rim Patterns at Interbike

I took about 6 videos at the Velocity booth. There are a ton of new Deep V rim patterns. All of the patterns might not appeal to you. But it is great that there are choices. And Velocity appears to have solved the image durability issue with a new process: Powder coat rim;  wrap rim with patterned "shrink wrap"; bake; clear coat with UV protection over wrap; bake again.

(Unfortunately, I've used up all of my space on Vimeo. So, I'll be adding about 10 new HD videos of Interbike new bikes, components, and bike accessories every week for the next millenium. However, I will be posting photos throughout the show.)

4 of 6 Velocity Videos from Interbike 2008 from Wheelgirl on Vimeo.

Interbike Vegas 2008: Affinity Track Pursuit Frames 5

5 of 5 videos of Affinity at Interbike.

5 of 5 Affinity Pursuit Fixed Gear Frame Sets from Wheelgirl on Vimeo.

Interbike Vegas 2008: Affinity Track Pursuit Frames 4

4 of 5 Affinity videos. This is the Bat Wing bar. Sleek one-piece bar-and-stem set up. I'll recheck the spec. to make sure that they are full carbon. The retail is $175 for the Bat Wing bar stem combo.

4 of 5: Affinity Track Bikes Bat Wing 1-Piece Bar and Stem from Wheelgirl on Vimeo.

Interbike Vegas 2008: Affinity Track Pursuit Frames 3

3 of 5 Affinity videos

3 of 5: Affinity Track and Pursuit Frame Sets from Wheelgirl on Vimeo.

Interbike Vegas 2008: Affinity Track Pursuit Frames 2

Video 2 of 5 of Affinity track bikes

2 of 5: Affinity Track Bike Pursuit Frames from Wheelgirl on Vimeo.

Interbike Vegas 2008: Affinity Track Pursuit Frames 1

I talked with Jason at Affinity. The pursuit frames are made in Taiwan. Affinity is located in Brooklyn, NY. And my guess is that they are going to have a ton of orders on their hands. The vibe at the booth was great. I'll follow up with the frame models and details, but for now, check out the videos.  I am taking a zillion videos of new gear at Interbike. The uploading takes a ton of time. So stay tuned.

1 of 5: Affinity Track Pursuit Frames from Wheelgirl on Vimeo.

El Toro Chromed-Plated Steel Pursuit Handle Bars, The Bull Horns Let You Stretch Out

We got in some of Soma's El Toro handle bars. In general, the chrome-plated Tange steel bars are much beefier than alloy bullhorn handle bars. The bars come in 38, 40, 42, and 48 cm widths. The have a 26.0 clamping diameter. And the inner diameter of the bar ends is 20.9.

You can come into the bike shop and squeeze the 40 cm ones we have. You either like the wrist angle of the bull horn bars by Soma or Nitto, or you don't. You need to try them and see if they make your wrists and arms happy. (According to the Soma website. The El Toro bars were after the Irvine, California, Air Force base burned down by aliens in the movie "Independence Day".)

You can fit the Soma pursuit levers with these bars, but according to the Soma site, you have to buy the  20.6 plugs separately. (The plugs that hold the Soma Pursuit brake levers inside the front part of the handle bar can expand from 19.6 to 20.6. And the El Toro bars are 20.9.) Make sure you check the expanding plug diameter of your levers before you get all happy; then, pout like a baby, and then curse like a sailor if  your intended pursuit or time-trial brake levers don't fit right.

Photos by Wheelgirl

3M Reflective Frame Pads Style and Stealth Safety

If you are planning to commute on your fixed gear through the darker winter months, you might want to visit the bike shop and check out the new Bici 3M Reflective frame pad that just arrived.The 3M reflective frame pad looks like a normal light gray frame pad during the day. But the entire surface is made from a reflective material produced by 3M. The frame pad turns a really bright reflective white when it catches the light. One advantage of reflective material on the top tube is that cars entering a main street from a side streets can see you. The first photo, taken inside the shop, shows afternoon sunlight on the frame pad (and the bags in the background with reflective piping and trim). The second photo shows a non-reflective frame pad covered in a white material next to the reflective Bici 3M reflective pad. Again, this photo was taken indoors in the afternoon, and the Bici 3M reflective pad is reflecting sunlight. It is wicked bright.

Photos by Wheelgirl

What Does A Toasted Chain Ring on a Fixed Gear Look Like, Mommy?

Money-saving fixed gear tips: This weekend, check to make sure that your chain ring bolts are all there and tight. Check to make sure that your chain line spacing is appropriate for the drive train configuration you are running on your home-made fixie or single-speed. Check to make sure that you have not over tightened your chain to kingdom come. The blood on the spider, which was twisted out of alignment and beyond repair, is that of the friend who tried to help the buddy who toasted the ring. (We put on a new Sugino Messenger track crank set and new Sugino BB. Really nice guys, but expensive learning experience.) Suggestion: Ride hard. Respect material stress tolerance ranges. Again, try to keep the blood inside your body.

Photo by Wheelgirl

White Industries Splined High-Flange Track Hubs with Splined Cogs are Here

I've been waiting to see the talked-about White Industries high-flange single-fixed splined track hub set, and we got a pair in the shop last week. Very nice piece of kit. The idea is that they take a special high-quality splined cog made by White Industries that fits on the hubs, like a puzzle piece. So you can't spin the cog off, cross-thread it, or through urban fixed gear acrobatics, damage the hub shell threads by rocking back and forth on a loose set up. You line up the splines of the cog with that of the hub; tighten the lock ring, and get spinning. You don't need a chain whip. You need only a lock ring tool to tighten the ring. Oh, and they are really pretty. I look at bike parts morning, noon, and night. It brings me much happiness to look at high-quality pretty hubs.(Jump for more photos, info about materials used, technical info, as well as wheel building hub measurement specs.)

Photos by Wheelgirl

Shimano Yumeya Website Has A Great Intro. and XTR White Gold Uber Parts

Usually, I hate to watch bike website Flash intros. I press the skip link, since I want specs, not dancing bike parts, and the far-from-entertaining intros seem to last forever. But you have to click here and see the new Shimano site for their new Yumeya product offerings. Yumeya is the set of new white and gold high-performance uber light XTR mountain bike parts. Don't skip the into. And make sure you have on your headphones if you are at work. There is music and a pretty loud yell.  This Kabuki cat, Mr. Ainosuke Katoaka, has so much fortitude and bearing, I had to watch the intro three times, and I forgot to check out the part specs.  He is not even a cat. Check out that hair. He is a lion, and he is the real deal.

As to the XTR offerings, if you are all about gold and white high-performance mountain bike groupset colorways, you need to check out the product offerings.

NiteRide MiNewt Mini-USB Light and Knog Frog Lights

The weather in the Bay Area is gorgeous in September and October. But soon we will all be riding around in the dark trying to figure out if those are puddles or potholes filled with water. Enter the NiteRider MiNewt Mini-USB.  I had the MiNewt model two years ago. And this year's MiNewt is smaller, lighter, and USB charge capable.

Now, Knog's Frog lights are light and easy to use. They have a steady and blinking mode. We sell a ton of them, and I keep a couple of those on my ride. They can live on your bike with little issue, and they help you to be seen. They come in many colors, and all of us at the shop really like the design and function of them. But the MiNewt Mini-USB is what you want if you are a commuter wanting to see where you are actually going on the bike. I have a couple of speed bumps on my ride home from work, and I have to hum my lucky tune when I am trying to see them in the dark with the one LED Frog light. The MiNewt light is bright enough to allow me to avoid pressing a bold raccoon on my commute home.(Jump for specs and detailed photos.)

Photos by Wheelgirl. Frog headlight, MiNewt USB, MiNewt Kit, Frog tail light. (Ti frame welds by Lynskey.)

Soma Double Toe Straps in Brown, White, and Black

You like the classic, understated, old school bike style, and you are trying to match your worn chestnut Brooks saddle to your double straps. Unfortunately, the only double toe straps you can find are the energetic and pricey but-oh-so-nice-and-laminated electric blue Toshi double straps? No worries. We just got a bunch of chestnut brown Soma double straps in the bike shop. We also received Soma white double straps, in case you are Italian traditional and are coordinating a white Selle Italia saddle. (The Soma double straps work with the Soma Oppy X 4-Gate toe clips. Two gates for Soma clips mean the toe clip needs a single strap, and 4 gates mean the clip needs a double strap. Yes, ordering clips always confuses me.) If you are a vagabond alley cat who feels all of this coordination of bike parts is psychically troubling, you can always opt for basic black.

Photos by Wheelgirl. (The black and white are still in their plastic wrapper.)